Buy Englander ESW0018 32-NC Wood Stove Online
The 3.5 ft³ firebox can take logs up to 20” long and can put out enough heat to warm up to 2,400 ft² of living space. The cast iron arched door with an extra-large glass surface provides a great view of this stove’s beautiful burn and makes a cozy addition to any room.
A rear heat shield and ash pan provide additional convenience, and side heat shields (not included) may be added for even closer clearances to combustibles. The stove is Mobile Home approved (USA) and can potentially generate more than 75,000 BTUs when burning seasoned cordwood.
Specifications
Fuel type |
Dry cordwood (16″ recommended)
|
Recommended heating area | Up to 2,400 |
Overall firebox volume | 3.5 ft³ |
EPA loading volume | 33 lb |
Maximum burn time | 10 h |
Maximum heat output-dry cordwood | 41,480 BTU/h (12.2 kW) |
Minimum overall heat output rate | 16,038 BTU/h (4.7 kW) |
Maximum overall heat output rate | 39,623 BTU/h (11.6 kW) |
Average overall efficiency-dry cordwood (HHV) | 69% |
Average overall efficiency-dry cordwood (LHV) | 74% |
Optimum efficiency | 76% |
Optimum heat transfer efficiency | 70% |
Average particulate emission rate | 2.0 g/h |
Average CO | 138 g/h |
Maximum log length | 20″ |
Shipping weight | 440 lb |
Overall dimension (Width) | 24″ |
Overall dimension (Height) | 35″ |
Overall dimension (Depth) | 29 1/2″ |
Warranty | 5 years limited |
Mobile home approved | Yes, US only |
Certified according to applicable standards |
By an accredited laboratory (CAN/USA)
|
Combustion technology | Non catalytic |
Stainless-steel secondary-air system | Yes |
Flue outlet diameter | 6″ |
Distance-center of the flue outlet to back unit | 7 1/2″ |
Distance-center of the flue outlet to side unit | 12″ |
Recommended chimney diameter | 6″ |
Type of chimney |
CAN/ULC S629, UL 103 HT (2100 °F)
|
Minimum chimney height | 15″ |
Door type | Single, glass with cast iron frame |
Door opening size (Width) | 15″ |
Door opening size (Height) | 10 3/4″ |
Glass type | Ceramic glass |
Glass surface – W x H | 15 1/8″ x 11 1/4″ |
Steel thickness-body | 3/16″ |
Steel thickness-top | 1/4″ |
Firebox size (Width) | 19 7/8″ |
Firebox size (Height) | 12 1/2″ |
Firebox size (Depth) | 22 5/8″ |
Log positioning | Loading over width or length |
Firebox lined with refractory bricks | Yes |
Baffle type |
Ceramic fiberboard (2 layers of 1/2″ ea.)
|
High-efficiency certified appliance | Yes, EPA 2020 approved |
Canadian Standard (emissions) | CSA B415.1-10 |
USA Standard (emissions) | ASTM E3053-17, EPA Alt 125 |
Canadian Standard (safety) | ULC-S 627-00 |
USA Standard (safety) | UL 1492-2011 |
Clearance To Combustibles
Country | Canada | United States | ||
Size | Single wall pipe | Double wall pipe | Single wall pipe |
Double wall pipe
|
Clearance – Back wall | 11″ | 11″ | 11″ | 11″ |
Clearance – Side wall | 26″ | 26″ | 26″ | 26″ |
Clearance – Corner | 12″ | 12″ | 12″ | 12″ |
Clearance – Base of the unit to ceiling** | 62″ | 62″ | 62″ | 62″ |
The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).
Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
- Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
- Optimum overall efficiency at a specific burn rate (LHV).
- This appliance is officially tested and certified by an independent agency.
- The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
- As measured per CSA B415.1-10 stack loss method.
- Higher Heating Value of the fuel.
- Lower Heating Value of the fuel.
- The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
- Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
Reviews
There are no reviews yet.